If you're still using a traditional T-handle walk-behind scrubber dryer to clean your commercial floors, you're probably finishing the job with a mop... and that extra step is costing you more than you think.
At Cleanstar, we've introduced DRYFT to Australia - the world's first S-Motion scrubber dryer, and it's rewriting the rules on what a floor cleaning machine should do. It's easy to assume that a bigger, heavier walk-behind machine means a more thorough clean. But size doesn't equal coverage. Traditional T-handle machines with circular rotary brush heads physically cannot clean into 90° corners, around toilet bases or under low partitions. That means every clean leaves up to 20% of your floor untouched. The mop comes out, labour time doubles and your "one machine" solution turns into a two-step process every single time.
DRYFT was engineered to solve exactly that. Its patented S-Motion technology covers 1.6 metres of floor width in a single forward pass, where a traditional T-handle scrubber requires operators to make up to four repetitive walks to cover the same distance. The result is 75% less walking and cleaning time cut in half. And because DRYFT's oscillating head runs at 4,200 RPM compared to the 140–500 RPM of a standard rotary brush machine, operators can move at pace without sacrificing cleaning quality. In fact, on textured surfaces and grout lines where rotary brushes simply skip across the high points and leave dirt behind, DRYFT's tight 5mm oscillating motion scrubs down into the surface for a genuinely deeper clean.
Where the difference becomes impossible to ignore is in the areas that T-handle machines simply can't reach. Bulky machine heads can't navigate around toilet bases or under cubicle partitions. DRYFT's patented head shape is designed to clean fully around toilets in a single pass, scrub right into corners, and with a world-leading 5cm head height, slide under partitions and shelving that defeat every other machine on the market. No follow-up mopping. No missed edges. No wasted labour.
Running costs tell the same story. DRYFT's 2.5-litre tank cleans up to 548m² before needing a refill, the CORE-ion battery delivers up to 75 minutes of runtime and the machine is designed so that 9 out of 10 service requirements can be handled by the operator themselves, which means no technician call-outs, no weeks of downtime.
T-handle walk-behind scrubbers were the best option available until now. DRYFT doesn't just compete with them - it makes them obsolete for any facility where complete floor coverage, labour efficiency and hygiene standards actually matter. Cleanstar is proud to be the exclusive Australian distributor of DRYFT.
Contact our team today to arrange a demonstration and see the difference for yourself.
| Feature | DRYFT S-Motion Scrubber Dryer | Traditional T-Handle Scrubber Dryer |
|---|---|---|
| Cleaning movement | Side-to-side S-Motion | Straight walk-behind passes |
| Width covered in one forward pass | Up to 1.6 metres | Multiple repetitive passes required |
| Corners and edges | Designed to reach tight areas | Circular brushes may leave gaps |
| Under partitions | 5 cm low-profile head | Often restricted by bulky heads |
| Scrubbing speed | 4,200 RPM | Typically 140–500 RPM |
| Follow-up mopping | Reduced or eliminated | Often required in missed areas |
| Suitable areas | Bathrooms, tight spaces and commercial floors | Mainly open floor areas |